Established in 1995. It possessestotal assets of 120.00 million RMB and occupies a land of 106,560 M2 with building area of 60,000 M.Our company employs 280 employees,among them there are 50 engineers and technicians.Thecompany is equipped with advanced equipment and enjoys excellent technology for mechanical andelectro-plating processing. lt has complete testing devices, perfect production management and strictenvironmental protection measures. Our products have high quality with good performance.Varioussizes and types of copper mould tubes and plates have been supplied to more than 200 customers in China.

Square & Rectangle Copper Mould Tube

copper-mould-tube

Round Copper Mould Tube

Copper Mould Plate

Not only do our copper mould tubes increase the efficiency and productivity in your manufacturing process but they also improve the quality of the products you produce!

Copper Mould Tube Casting

Name

Size/ltem

CAMBER RADIUS

THICKNESS

LENGTH

REMARKS

Square & Rectangle Copper tubes

Square 50×50~650×650 Rectangle (100-500) ×650

3000 ~ 17000 

6-50

602-1100

With slot single taper, double taper, triple taper, quadruplicate taper, parabolic taper and varius kinds of continuous taper high effciency copper mould tubes

Round copper tubes

2110-01500

5000-17000 Also straight

10-50

602-900

With slot double taper, quadruplicate taper. Parabolic taper and varius kinds of

continuous  taper high effciency copper mould tubes 

Non-standard copper mould tubes Beam Blank copper mould tubes

535-150×120-70

6000-14000

12-50

700-1016

With slot single taper, double taper, triple taper. Quadruplicate taper, parabolic taper

Copper Mould Plate

COPPER PLATE SIZE

SPECIFICATIONs

MATERIAL

COATING

LENGTH

WIDTH

THICKNESS

Slab

350-3800

700-1000

35-300

Cr-Zr-Cu.CuAg

Ni-Co、Cr、Ni-Fe

Beam Blank

350-900

300-1000

35-300

Cr-Zr-Cu、CuAg

Ni-Co、Cr、Ni-Fe

Rectangle

700-900

200-3000

30-70

Cr-Zr-Cu.CuAg

Ni-Co、Cr、Ni-Fe

Thin Slab

1200-2000

1100-1200

 

Cr-Zr-Cu.CuAg

Ni-Co、cr

Ultra-thin Slab

1530

700-900

 

Cr-Zr-Cu、CuAg

Ni-Co、Cr

Our cutting edge technology and superior craftsmanship ensures that our product is reliable and long lasting.

Good raw materials

Through the addition of about 0.1% silver,strength is significantly enhanced with no loss in thermal conductivity.


Cr and Zr precipitation hardening provides this alloy with high strength, high resistance to heat, and thermal conductivity.

Special coatings

LMM GROUP We use hard chrome plating to increase the life of mould tubes. The plating thickness recommended by LMM will be controlled in the best range.


LMM to provide Cr coating, Ni-Cr coating, Ni-Fe coating and Ni-Cr coating to meet the demand of various customers both at home and abroad.

LMM equipment with a complete set of production process

Smelting/Casting: 2 line Smelting furnace and continuous casting machine

Forging/Extrusion: 9 sets Hydraulic Press

Machining:
23 various units CNC Machines
2 Sets Special CNC Processing Machines

Electro-plating
1 line Copper Annealing Furnace
2 lines One electro plating Line for tube and plate each

Quality Assurance:
1 set Tensile Strength Machine
5 sets Harness meters
2 sets Thickness meters
1 set Ultrasonic flaw detection machine

Smelting/Casting < Forging/Extrusion < Machining < Electro-plating < Quality Assurance

The world's largest tubular mold (220x1250) was poured successfully

The company strictly according to modern enterprise management requirements set up a perfectquality assurance system, and passed the ISO9001:2008 quality management system certification, ISO14001:2004 environmental management system certification, OHSAS18001:1999 occupationalhealth and safety management system certification.

ABIDING BY THE HIGHEST CREDIBILITY FOR OUR CUSTOMERS

LMM GROUP for your improved service

Pre-Sales Service

* Inquiry and consulting support.

* Planning layout and Design requires machinery

* Welcome visit our Factory.

After-Sales Service

* Engineers available to service machinery overseas.

* IN-TIME delivery goods.

* Free charges for installing, training and debugging.

* Long-term technical support.

Q:I have some special requirement about specifications,can you do it?
A:Yes.We have a well-rounded product range, which endows us with the capability of applying many special specifications. Please feel free to contact us with yours.
Q:Do you accept OEM service?
A:Yes, we do.
Q:What is your delivery time?
A:It depends on the size/complexity of your order and our own production schedule. Usually we provide a faster delivery than the industry’s average.
Q:What is the payment term?
A:Our payment terms are negotiable.
Q:Can I have my own logo on the product?
A:Sure, we can apply your own logo on the products according to your drawings

Contact us now and get your perfect copper mold solution today!

No matter what the use, LMMGROUP offers high-quality mold tube at competitive prices for your next project.

Special product design, please send specific data and drawings to our mailbox or form.