Tension and straightening machine（continuous casting machine） is mainly used in metallurgical industry. It is used to flatten metal sheets to improve their surface quality and strength to meet specific industrial needs. Correct lubrication method is an important guarantee for the long-term normal operation of tension and straightening machine.
tension and straightening machine（continuous casting machine）
The traditional lubrication method has many problems such as the thickness of the oil film being difficult to carry such a huge load, poor sealing of the bearing seat, serious oil leakage, etc. The application of oil and gas lubrication not only improves the above problems, but also significantly extends the service life of the equipment, bringing considerable benefits. economic benefits. Oil-gas lubrication is almost not limited by the viscosity of the oil. Not only thin oil, semi-fluid dry oil, and even lubricants with a high proportion of solid particles added can be supplied smoothly; the gas-liquid two-phase film formed follows the two-phase flow. As the relative volume content of small air bubbles in the medium increases, the thickness of the lubricating film also increases accordingly, and the formation rate of the lubricating film is higher. Compared with the single-phase liquid film, the load-bearing capacity is greatly improved. The application of oil and gas lubrication on tension and straightening machines has shown many advantages compared with traditional lubrication methods. First of all, it can significantly improve the operational stability and reliability of the equipment and make the equipment operation more flexible. In addition, oil and gas lubrication also has high lubrication efficiency, which can greatly extend the life of transmission parts, while improving the utilization rate of lubricating oil and achieving energy conservation and environmental protection. This technology can significantly reduce the operation and maintenance costs of lubricated equipment in harsh environments. Oil and gas lubrication has good adaptability to oil viscosity, high degree of automation, complete monitoring methods, and short investment recovery period. It is currently the most popular lubrication method in the metallurgical industry.
2 Responses
Your blog has quickly become one of my favorites. Your writing is both insightful and thought-provoking, and I always come away from your posts feeling inspired. Keep up the phenomenal work!
Thank you for your likes, I hope the article is helpful to you